The Kubota M95X has a 3-point hitch lift capacity of 5,203 lb (2,360 kg) at 24 inches behind the link ends. It also lists hitch category Category 2 / Category 1, hydraulic pump flow 18 gpm (68.1 L/min), and operating weight 9,050 lb (4,105 kg).
Best rear lift figure5,203 lb (2,360 kg)
Lift at 24 inches5,203 lb (2,360 kg)
Hitch categoryCategory 2 / Category 1
Operating weight9,050 lb (4,105 kg)
Kubota M95X 3-Point Hitch Lift Capacity
3-point hitch lift capacity
5,203 lb (2,360 kg)
Lift capacity at 24 inches behind link ends
5,203 lb (2,360 kg)
Hitch category
Category 2 / Category 1
Hitch control type
position control
Hydraulic pump flow
18 gpm (68.1 L/min)
Operating weight
9,050 lb (4,105 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
5,203 lb
Average
5,000 lb
Low
2,500 lb
High
8,500 lb
Lift at 24 inches comparison
This model
5,203 lb
Average
5,000 lb
Low
2,500 lb
High
8,500 lb
Hydraulic pump flow comparison
This model
18 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
9,050 lb
Average
10,000 lb
Low
6,000 lb
High
16,000 lb
Kubota M95X Hitch and Rear Lift Notes
Rear lift capacity note
For the Kubota M95X, 5,203 lb (2,360 kg) is the headline rear-lift capacity captured. This matters for ballast boxes, tillers, blades, mowers and other mounted implements
24-inch lift note
The 24-inch lift figure is usually the more useful number because rear implements hang behind the lift arms, not directly on them
Hitch category note
The Kubota M95X hitch category is listed as Category 2 / Category 1. This matters because rear implements need to match the tractor’s hitch pin size and geometry
Hitch control note
The Kubota M95X’s hitch-control field is shown as position control. Use it as a soft reference, not a headline specification
Hydraulic flow note
The 18 gpm (68.1 L/min) hydraulic flow figure helps round out the Kubota M95X’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 9,050 lb (4,105 kg) operating weight gives context for the Kubota M95X’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
Use the Kubota M95X’s hitch capacity as a filter before shopping for hay equipment, larger mower, cultivator, heavy blade, and mounted planter
Kubota M95X 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota M95X?
Rear lift capacity for the Kubota M95X is shown as 5,203 lb (2,360 kg) for lift at 24 inches behind the link ends. For real attachment matching, there is useful capacity here, but long or heavy implements still need ballast and stability checks.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota M95X is listed at 5,203 lb (2,360 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota M95X?
Yes. The Kubota M95X is listed as Category 2 / Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota M95X?
Start with 5,203 lb (2,360 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include hay equipment, larger mower, cultivator, heavy blade, and mounted planter.
Do hydraulic flow and weight matter for the Kubota M95X?
Yes. The Kubota M95X lists hydraulic pump flow of 18 gpm (68.1 L/min) and operating weight of 9,050 lb (4,105 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
