The Kubota M110 coolant capacity is listed as 11.81 gal (44.7 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M110 tractor to protect against freezing and corrosion.
Kubota M110 Coolant Capacity
| Cooling system capacity | 11.81 gal (44.7 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M110 tractor to protect against freezing and corrosion |
| Engine horsepower | 110 hp (82 kW) |
| Engine displacement | 3.8 L (230.1 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota M110 Coolant and Engine Notes
| Coolant capacity note | The headline cooling-system number for the Kubota M110 is 11.81 gal (44.7 L). Buy enough coolant before opening the drain plug |
|---|---|
| Coolant type note | Coolant type for the Kubota M110 is listed as ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The safest move is to use coolant that matches the manual’s spec rather than mixing random formulas |
| Antifreeze mix note | The Kubota M110 antifreeze mix is listed as Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M110 tractor to protect against freezing and corrosion. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota M110, the supporting engine specs are engine horsepower 110 hp (82 kW) and displacement 3.8 L (230.1 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | When refilling the Kubota M110, use 11.81 gal (44.7 L) as the planning number and Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M110 tractor to protect against freezing and corrosion as the mixture guide. Recheck the level after the thermostat opens |
Kubota M110 Coolant Capacity FAQ
How much coolant does the Kubota M110 take?
The main coolant amount captured for the Kubota M110 is 11.81 gal (44.7 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota M110?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota M110, the captured coolant type is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
What antifreeze mix does the Kubota M110 use?
The captured antifreeze mix for the Kubota M110 is Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M110 tractor to protect against freezing and corrosion. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota M110 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota M110 coolant capacity?
The captured engine context is horsepower 110 hp (82 kW) and displacement 3.8 L (230.1 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
