The Kubota M4062 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota M4062 Coolant Capacity
| Coolant capacity | 2.17 gal (8.2 L) |
|---|---|
| Cooling system capacity | 2.17 gal (8.2 L) |
| Radiator capacity | 2.17 gal (8.2 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 66 hp (49.2 kW) |
| Engine displacement | 3.3 L (203.3 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota M4062 Coolant and Engine Notes
| Coolant capacity note | The Kubota M4062’s key coolant figure here is 2.17 gal (8.2 L) for coolant capacity. Use that before buying coolant or draining the system |
|---|---|
| Radiator capacity note | For the Kubota M4062, the captured radiator capacity is 2.17 gal (8.2 L). If you are doing a full drain, check the full cooling-system capacity too |
| Coolant type note | For the Kubota M4062, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix note | For the Kubota M4062, the captured mix is 50/50 coolant and water mix. Straight water is not the right long-term answer unless you are only flushing the system |
| Engine context note | Engine context for the Kubota M4062: engine horsepower 66 hp (49.2 kW) and displacement 3.3 L (203.3 cu in). Engine size helps explain why coolant capacity changes between models |
| Refill note | The practical service move for the Kubota M4062: buy enough coolant for 2.17 gal (8.2 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota M4062 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota M4062?
The Kubota M4062 cooling system capacity is shown as 2.17 gal (8.2 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota M4062?
Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota M4062?
Not for normal long-term use. The Kubota M4062 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota M4062?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota M4062 is the service interval in the operator manual.
Why does the Kubota M4062 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota M4062, the supporting engine data is horsepower 66 hp (49.2 kW) and displacement 3.3 L (203.3 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
