The Kubota L355 tractor is 132 in long, 48 in wide, and 96 in tall, with a 76.6 in wheelbase.
Length132 in (11 ft 0 in) / 3,352.8 mm
Width48 in (4 ft 0 in) / 1,219.2 mm
Height96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase76.6 in (6 ft 4.6 in) / 1,945.6 mm
Ground clearance12 in (1 ft 0 in) / 304.8 mm
Kubota L355 Dimensions
Overall length
132 in (11 ft 0 in) / 3,352.8 mm
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Overall height
96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase
76.6 in (6 ft 4.6 in) / 1,945.6 mm
Ground clearance
12 in (1 ft 0 in) / 304.8 mm
Front tread width
51.2 in (4 ft 3.2 in) / 1,300.5 mm
Rear tread width
55.1 in (4 ft 7.1 in) / 1,399.5 mm
Tractor Size Comparison Chart
Overall length comparison
This model
132 in
Average
125 in
Low
100 in
High
155 in
Overall width comparison
This model
48 in
Average
60 in
Low
45 in
High
78 in
Overall height comparison
This model
96 in
Average
89 in
Low
70 in
High
108 in
Wheelbase comparison
This model
76.6 in
Average
72 in
Low
58 in
High
88 in
Ground clearance comparison
This model
12 in
Average
12 in
Low
8 in
High
17 in
Kubota L355 Extra Dimension Notes
Storage fit note
For the Kubota L355, storage should be planned around a taller opening. With length 132 in (11 ft 0 in) / 3,352.8 mm, width 48 in (4 ft 0 in) / 1,219.2 mm, and height 96 in (8 ft 0 in) / 2,438.4 mm, height is likely the key check.
Fitment note
The Kubota L355 is best judged by length at 132 in (11 ft 0 in) / 3,352.8 mm, width at 48 in (4 ft 0 in) / 1,219.2 mm, and height at 96 in (8 ft 0 in) / 2,438.4 mm. The biggest issue is usually width or height, not just floor length.
Wheelbase note
The Kubota L355 gives a wheelbase figure of 76.6 in (6 ft 4.6 in) / 1,945.6 mm. That helps describe the tractor’s stance.
Ground clearance note
The Kubota L355 ground clearance spec is 12 in (1 ft 0 in) / 304.8 mm. It helps decide how forgiving the tractor is on uneven ground.
Tread width note
The Kubota L355 tread-width capture shows 51.2 in (4 ft 3.2 in) / 1,300.5 mm at the front and 55.1 in (4 ft 7.1 in) / 1,399.5 mm at the rear. This supports row-spacing and stability comparisons.
Storage Tips
Do not use exact dimensions as the storage target; allow clearance for ROPS/cab setup, mirrors and attachments.
A straight approach into the bay matters more as tractor width and wheelbase increase.
For a compact tractor, storage usually comes down to doorway height and attachment length.
Use the 76.6 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
What size garage will fit the tractor?
If the tractor is stored bare, compare your garage to 132 in long, 48 in wide and 96 in tall. If you want normal parking room, use around 9 ft high, 8 ft wide, and 15 ft deep instead.
What size door should I check?
The tractor is 96 in tall, 48 in wide and 132 in long. Check a clear opening around 9 ft high, 8 ft wide and 15 ft deep so you are not parking with inches to spare.
Do attachments change the storage size?
Yes. The bare tractor is 132 in long, 48 in wide and 96 in tall; a loader, mower deck, ballast box or rear implement can push the parked size past those numbers.
How much maneuvering room should I allow?
If attachments stay fitted, maneuvering room must be based on the attached length, not just the 132 in bare tractor length and 76.6 in wheelbase.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
