The Kubota L295 coolant capacity is listed as 1.59 gal (6 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota L295 Coolant Capacity
| Coolant capacity | 1.59 gal (6 L) |
|---|---|
| Radiator capacity | 1.53 gal (5.8 L) |
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Coolant change interval | every 2 years and every 2,000 hours |
| Engine horsepower | 30 hp (22.4 kW) |
| Engine displacement | 1.3 L (79.3 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota L295 Coolant and Engine Notes
| Coolant capacity note | The Kubota L295’s key coolant figure here is 1.59 gal (6 L) for coolant capacity. Use that before buying coolant or draining the system |
|---|---|
| Radiator capacity note | For the Kubota L295, the captured radiator capacity is 1.53 gal (5.8 L). If you are doing a full drain, check the full cooling-system capacity too |
| Coolant type note | The captured coolant type for the Kubota L295 is ethylene glycol-based coolant and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Antifreeze mix note | For the Kubota L295, the captured mix is 50/50 coolant and water mix. Straight water is not the right long-term answer unless you are only flushing the system |
| Coolant change interval note | Coolant service for the Kubota L295 is listed as every 2 years and every 2,000 hours. If the service history is unknown, a fresh drain and refill is usually the cleaner move |
| Engine context note | Engine context for the Kubota L295: engine horsepower 30 hp (22.4 kW) and displacement 1.3 L (79.3 cu in). Engine size helps explain why coolant capacity changes between models |
| Refill note | For a coolant change on the Kubota L295, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota L295 Coolant Capacity FAQ
How much coolant does the Kubota L295 take?
The main coolant amount captured for the Kubota L295 is 1.59 gal (6 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota L295?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota L295, the captured coolant type is ethylene glycol-based coolant and ASTM D3306 compatible.
What antifreeze mix does the Kubota L295 use?
The captured antifreeze mix for the Kubota L295 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota L295 coolant be replaced?
Use every 2 years and every 2,000 hours as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota L295 coolant capacity?
The captured engine context is horsepower 30 hp (22.4 kW) and displacement 1.3 L (79.3 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
