The Kubota L2850 has a 3-point hitch lift capacity of 1,760 lb (798 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 7.8 gpm (29.5 L/min), and operating weight 2,800 lb (1,270 kg).
Best rear lift figure1,760 lb (798 kg)
Lift at 24 inches1,760 lb (798 kg)
Hitch categoryCategory 1
Operating weight2,800 lb (1,270 kg)
Kubota L2850 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,425 lb (1,100 kg)
Lift capacity at 24 inches behind link ends
1,760 lb (798 kg)
Hitch category
Category 1
Hydraulic pump flow
7.8 gpm (29.5 L/min)
Operating weight
2,800 lb (1,270 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,760 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,760 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
7.8 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,800 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota L2850 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota L2850 is 1,760 lb (798 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota L2850, the 1,760 lb (798 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The 7.8 gpm (29.5 L/min) hydraulic flow figure helps round out the Kubota L2850’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 2,800 lb (1,270 kg) operating weight gives context for the Kubota L2850’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota L2850’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota L2850 3-Point Hitch FAQ
What is the Kubota L2850 3-point hitch lift capacity?
The Kubota L2850 is listed with 1,760 lb (798 kg) for lift at 24 inches behind the link ends. That makes it a compact rear-lift tractor, so it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades.
What does the Kubota L2850 24-inch lift capacity mean?
It means the Kubota L2850 is rated to lift 1,760 lb (798 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota L2850 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 1,760 lb (798 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota L2850 lift?
Use the 1,760 lb (798 kg) rating at 24 inches behind the link ends as the first filter for implements such as box blade, small rotary cutter, tiller, ballast box, and rear blade. Also check hitch category Category 1 and operating weight 2,800 lb (1,270 kg) before choosing the implement.
Is lift capacity enough to size implements for the Kubota L2850?
No. The Kubota L2850 may list 1,760 lb (798 kg) of rear lift, but the 2,800 lb (1,270 kg) operating weight and 7.8 gpm (29.5 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
