The Kubota L260 tractor is 96 in long, 48 in wide, and 96 in tall, with a 61.2 in wheelbase.
Length96 in (8 ft 0 in) / 2,438.4 mm
Width48 in (4 ft 0 in) / 1,219.2 mm
Height96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase61.2 in (5 ft 1.2 in) / 1,554.5 mm
Kubota L260 Dimensions
Overall length
96 in (8 ft 0 in) / 2,438.4 mm
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Overall height
96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase
61.2 in (5 ft 1.2 in) / 1,554.5 mm
Rear tread width
11.2 in / 284.5 mm
Tractor Size Comparison Chart
Overall length comparison
This model
96 in
Average
105 in
Low
70 in
High
140 in
Overall width comparison
This model
48 in
Average
48 in
Low
34 in
High
66 in
Overall height comparison
This model
96 in
Average
68 in
Low
42 in
High
94 in
Wheelbase comparison
This model
61.2 in
Average
58 in
Low
42 in
High
74 in
Kubota L260 Extra Dimension Notes
Size class note
In practical size terms, the Kubota L260 lands in small compact tractor territory. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The Kubota L260 storage fit is possible in the right shed. With length 96 in (8 ft 0 in) / 2,438.4 mm, width 48 in (4 ft 0 in) / 1,219.2 mm, and height 96 in (8 ft 0 in) / 2,438.4 mm, leave space for attachments and turning room.
Fitment note
The Kubota L260 dimension row shows length at 96 in (8 ft 0 in) / 2,438.4 mm, width at 48 in (4 ft 0 in) / 1,219.2 mm, and height at 96 in (8 ft 0 in) / 2,438.4 mm. Treat those as the headline measurements for storage, transport and property access.
Wheelbase note
Wheelbase is listed at 61.2 in (5 ft 1.2 in) / 1,554.5 mm for the Kubota L260. That is one of the main chassis-size measurements.
Tread width note
The Kubota L260 rear tread width is listed at 11.2 in / 284.5 mm. Front tread width was not captured cleanly in this row.
Storage Tips
Do not use exact dimensions as the storage target; allow clearance for ROPS/cab setup, mirrors and attachments.
Recommended storage clearance: target about 108 in (9 ft) clear height; target about 96 in (8 ft) clear width; target about 180 in (15 ft) bay depth.
This is a smaller tractor class, so tight acreage sheds and small equipment bays are realistic if the doorway clears.
Use the 61.2 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
What size garage will fit the tractor?
The tractor itself is 96 in long, 48 in wide, 96 in tall, and 61.2 in wheelbase. For storage, that means the opening should be closer to 9 ft high and 8 ft wide, with about 15 ft of usable depth.
What size door should I check?
The clean check is 9 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 96 in height, 48 in width and 96 in length.
Do attachments change the storage size?
Yes. Measure the tractor in storage trim: highest point compared with 96 in, widest point compared with 48 in, and longest parked length compared with 96 in.
How much maneuvering room should I allow?
If you cannot approach straight, go wider than 8 ft. With 48 in tractor width and a 61.2 in wheelbase, angled entries need extra side margin.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
