The Kubota L185 tractor is 54 in wide and 53 in tall.
Width54 in (4 ft 6 in) / 1,371.6 mm
Height53 in (4 ft 5 in) / 1,346.2 mm
Kubota L185 Dimensions
Overall width
54 in (4 ft 6 in) / 1,371.6 mm
Overall height
53 in (4 ft 5 in) / 1,346.2 mm
Rear tread width
40.5 in (3 ft 4.5 in) / 1,028.7 mm
Tractor Size Comparison Chart
Overall width comparison
This model
54 in
Average
165 in
Low
120 in
High
220 in
Overall height comparison
This model
53 in
Average
160 in
Low
125 in
High
220 in
Kubota L185 Extra Dimension Notes
Storage fit note
For shed fit, the Kubota L185 is not oversized. With width 54 in (4 ft 6 in) / 1,371.6 mm and height 53 in (4 ft 5 in) / 1,346.2 mm, a good garage, carport or compact shed may be workable.
Fitment note
The Kubota L185 size numbers are width at 54 in (4 ft 6 in) / 1,371.6 mm and height at 53 in (4 ft 5 in) / 1,346.2 mm. Use those before assuming it will fit into an existing bay or shed.
Tread width note
The Kubota L185 rear wheel tread is 40.5 in (3 ft 4.5 in) / 1,028.7 mm. Treat the front tread as unconfirmed here.
Storage Tips
For the Kubota L185, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
Measure the lowest overhead point, not the tallest part of the shed roof.
The Kubota L185 should be treated as broadacre-sized machinery for storage planning.
Storage FAQ
What size garage will fit the tractor?
With 53 in height and 54 in width, the doorway is the first limit; with length not captured length, bay depth is the second. Start with 8 ft high and 10 ft wide, not the bare dimensions.
What size door should I check?
Use the Kubota L185’s dimensions directly: 53 in tall needs more than a 53 in opening, 54 in wide needs side clearance, and length not captured long needs about the tractor length plus attachment room bay depth.
Do attachments change the storage size?
Yes. If the storage target is 8 ft high and 10 ft wide, attachments should be checked against that, not against the bare length not captured length alone.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured length not captured tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
