The Kubota L1-28 has a 3-point hitch lift capacity of 1,435 lb (651 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 5.5 gpm (20.8 L/min), and operating weight 2,800 lb (1,270 kg).
Best rear lift figure1,435 lb (651 kg)
Lift at 24 inches1,435 lb (651 kg)
Hitch categoryCategory 1
Operating weight2,800 lb (1,270 kg)
Kubota L1-28 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,433 lb (650 kg)
Lift capacity at 24 inches behind link ends
1,435 lb (651 kg)
Hitch category
Category 1
Hydraulic pump flow
5.5 gpm (20.8 L/min)
Operating weight
2,800 lb (1,270 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,435 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,435 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
5.5 gpm
Average
5 gpm
Low
2.5 gpm
High
8 gpm
Operating weight comparison
This model
2,800 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota L1-28 Hitch and Rear Lift Notes
24-inch lift note
The Kubota L1-28’s 1,435 lb (651 kg) lift rating at 24 inches behind the link ends is the better real-world number for mounted implements than a bare hitch-end rating
Hitch category note
Hitch category on the Kubota L1-28 is Category 1. That is one of the first checks before buying a rear blade, tiller, mower or ballast box
Hydraulic flow note
Hydraulic pump flow is listed as 5.5 gpm (20.8 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Operating weight note
For the Kubota L1-28, operating weight is 2,800 lb (1,270 kg). Use that beside rear lift capacity before hanging a heavy implement out the back
Rear implement matching
For the Kubota L1-28, compare 1,435 lb (651 kg) with real implement weight. Common rear-implement checks include box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota L1-28 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota L1-28?
Rear lift capacity for the Kubota L1-28 is shown as 1,435 lb (651 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota L1-28 is listed at 1,435 lb (651 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota L1-28?
Yes. The Kubota L1-28 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota L1-28?
Start with 1,435 lb (651 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota L1-28?
Yes. The Kubota L1-28 lists hydraulic pump flow of 5.5 gpm (20.8 L/min) and operating weight of 2,800 lb (1,270 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
