The Kubota L1-24 coolant capacity is listed as 1.6 gal (6.1 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota L1-24 Coolant Capacity
| Coolant capacity | 1.59 gal (6 L) |
|---|---|
| Cooling system capacity | 1.6 gal (6.1 L) |
| Radiator capacity | 1.6 gal (6.1 L) |
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine model | D1462 |
| Engine horsepower | 23 hp (17.2 kW) |
| Engine displacement | 1.5 L (91.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota L1-24 Coolant and Engine Notes
| Coolant capacity note | For service planning, the Kubota L1-24 should be treated as 1.6 gal (6.1 L) coolant capacity. That is a compact tractor cooling system where a normal premixed coolant jug may cover most of the refill |
|---|---|
| Radiator capacity note | For the Kubota L1-24, the captured radiator capacity is 1.6 gal (6.1 L). If you are doing a full drain, check the full cooling-system capacity too |
| Coolant type note | The captured coolant type for the Kubota L1-24 is ethylene glycol-based coolant and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Antifreeze mix note | For the Kubota L1-24, the captured mix is 50/50 coolant and water mix. Straight water is not the right long-term answer unless you are only flushing the system |
| Engine context note | Engine context for the Kubota L1-24: engine model D1462, engine horsepower 23 hp (17.2 kW), and displacement 1.5 L (91.5 cu in). Engine size helps explain why coolant capacity changes between models |
| Refill note | For a coolant change on the Kubota L1-24, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota L1-24 Coolant Capacity FAQ
How much coolant does the Kubota L1-24 take?
The main coolant amount captured for the Kubota L1-24 is 1.6 gal (6.1 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota L1-24?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota L1-24, the captured coolant type is ethylene glycol-based coolant and ASTM D3306 compatible.
What antifreeze mix does the Kubota L1-24 use?
The captured antifreeze mix for the Kubota L1-24 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota L1-24 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Kubota L1-24 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota L1-24, the supporting engine data is engine model D1462, horsepower 23 hp (17.2 kW), and displacement 1.5 L (91.5 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
