Kubota KL48Z Tractor Dimensions, Length, Width & Height

Quick answer:

The Kubota KL48Z tractor is 136.8 in long, 61 in wide, and 93.3 in tall, with a 76.4 in wheelbase.

Length136.8 in (11 ft 4.8 in) / 3,474.7 mm
Width61 in (5 ft 1 in) / 1,549.4 mm
Height93.3 in (7 ft 9.3 in) / 2,369.8 mm
Wheelbase76.4 in (6 ft 4.4 in) / 1,940.6 mm
Ground clearance17.3 in (1 ft 5.3 in) / 439.4 mm

Kubota KL48Z Dimensions

Overall length 136.8 in (11 ft 4.8 in) / 3,474.7 mm
Overall width 61 in (5 ft 1 in) / 1,549.4 mm
Overall height 93.3 in (7 ft 9.3 in) / 2,369.8 mm
Wheelbase 76.4 in (6 ft 4.4 in) / 1,940.6 mm
Ground clearance 17.3 in (1 ft 5.3 in) / 439.4 mm

Tractor Size Comparison Chart

Overall length comparison

This model

136.8 in

Average

125 in

Low

100 in

High

155 in

Overall width comparison

This model

61 in

Average

60 in

Low

45 in

High

78 in

Overall height comparison

This model

93.3 in

Average

89 in

Low

70 in

High

108 in

Wheelbase comparison

This model

76.4 in

Average

72 in

Low

58 in

High

88 in

Ground clearance comparison

This model

17.3 in

Average

12 in

Low

8 in

High

17 in

Kubota KL48Z Extra Dimension Notes

Storage fit note For storage, the Kubota KL48Z is more tall-garage or small-shed territory. With length 136.8 in (11 ft 4.8 in) / 3,474.7 mm, width 61 in (5 ft 1 in) / 1,549.4 mm, and height 93.3 in (7 ft 9.3 in) / 2,369.8 mm, a normal low garage may be tight.
Fitment note The Kubota KL48Z dimension set is length at 136.8 in (11 ft 4.8 in) / 3,474.7 mm, width at 61 in (5 ft 1 in) / 1,549.4 mm, and height at 93.3 in (7 ft 9.3 in) / 2,369.8 mm. Keep some margin for tire bulge, steps, fenders, lights and attachments.
Wheelbase note The Kubota KL48Z lists wheelbase at 76.4 in (6 ft 4.4 in) / 1,940.6 mm. Use this when comparing actual chassis size.
Ground clearance note The Kubota KL48Z clearance figure, 17.3 in (1 ft 5.3 in) / 439.4 mm, is worth checking for row crop, stubble and uneven ground.

Storage Tips

  • Use a tall garage, barn bay or small machinery shed as the first storage check for the Kubota KL48Z.
  • Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 9 ft high, 8 ft wide, and 15 ft deep.
  • Wheelbase is 76.4 in, so leave room to line it up cleanly rather than forcing it through a tight angle.

Storage FAQ

What size garage will fit the tractor?

At 136.8 in long, 61 in wide, 93.3 in tall, and 76.4 in wheelbase, a tall garage or small shed is the realistic starting point. Use about 9 ft high, 8 ft wide, and 15 ft deep before counting attachments.

What size door should I check?

The clean check is 9 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 93.3 in height, 61 in width and 136.8 in length.

Do attachments change the storage size?

Yes. Measure the tractor in storage trim: highest point compared with 93.3 in, widest point compared with 61 in, and longest parked length compared with 136.8 in.

How much maneuvering room should I allow?

If you cannot approach straight, go wider than 8 ft. With 61 in tractor width and a 76.4 in wheelbase, angled entries need extra side margin.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.