The Kubota KL34Z tractor is 118 in long, 54 in wide, and 83 in tall.
Length118 in (9 ft 10 in) / 2,997.2 mm
Width54 in (4 ft 6 in) / 1,371.6 mm
Height83 in (6 ft 11 in) / 2,108.2 mm
Kubota KL34Z Dimensions
Overall length
118 in (9 ft 10 in) / 2,997.2 mm
Overall width
54 in (4 ft 6 in) / 1,371.6 mm
Overall height
83 in (6 ft 11 in) / 2,108.2 mm
Rear tread width
48.4 in (4 ft 0.4 in) / 1,229.4 mm
Tractor Size Comparison Chart
Overall length comparison
This model
118 in
Average
125 in
Low
100 in
High
155 in
Overall width comparison
This model
54 in
Average
60 in
Low
45 in
High
78 in
Overall height comparison
This model
83 in
Average
89 in
Low
70 in
High
108 in
Kubota KL34Z Extra Dimension Notes
Storage fit note
For shed fit, the Kubota KL34Z is not oversized. With length 118 in (9 ft 10 in) / 2,997.2 mm, width 54 in (4 ft 6 in) / 1,371.6 mm, and height 83 in (6 ft 11 in) / 2,108.2 mm, a good garage, carport or compact shed may be workable.
Fitment note
For the Kubota KL34Z, length at 118 in (9 ft 10 in) / 2,997.2 mm, width at 54 in (4 ft 6 in) / 1,371.6 mm, and height at 83 in (6 ft 11 in) / 2,108.2 mm are the measurements that decide whether it is easy or annoying to store.
Tread width note
The Kubota KL34Z rear wheel tread is 48.4 in (4 ft 0.4 in) / 1,229.4 mm. Treat the front tread as unconfirmed here.
Storage Tips
For the Kubota KL34Z, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Storage FAQ
What size garage will fit the tractor?
At 118 in long, 54 in wide, and 83 in tall, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft high, 8 ft wide, and 15 ft deep before counting attachments.
What size door should I check?
The clean check is 8 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 83 in height, 54 in width and 118 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 83 in for overhead clearance, 54 in for side clearance and 118 in for bay depth.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 118 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
