The Kubota JB16 has a 3-point hitch lift capacity of 1,200 lb (544 kg) at 24 inches behind the link ends. It also lists hydraulic pump flow 5.8 gpm (22 L/min) and operating weight 1,301 lb (590 kg).
Best rear lift figure1,200 lb (544 kg)
Lift at 24 inches1,200 lb (544 kg)
Operating weight1,301 lb (590 kg)
Kubota JB16 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,200 lb (544 kg)
Lift capacity at 24 inches behind link ends
1,200 lb (544 kg)
Hydraulic pump flow
5.8 gpm (22 L/min)
Operating weight
1,301 lb (590 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
5.8 gpm
Average
5 gpm
Low
2.5 gpm
High
8 gpm
Operating weight comparison
This model
1,301 lb
Average
1,300 lb
Low
700 lb
High
2,200 lb
Kubota JB16 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota JB16 is 1,200 lb (544 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota JB16, the 1,200 lb (544 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The 5.8 gpm (22 L/min) hydraulic flow figure helps round out the Kubota JB16’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 1,301 lb (590 kg) operating weight gives context for the Kubota JB16’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota JB16’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota JB16 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota JB16?
Rear lift capacity for the Kubota JB16 is shown as 1,200 lb (544 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota JB16 is listed at 1,200 lb (544 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
What hitch category is the Kubota JB16?
This row does not show a clean hitch category for the Kubota JB16. Check the operator manual or official spec sheet before buying implements, because lift capacity alone does not guarantee fit.
How should I match rear implements to the Kubota JB16?
Start with 1,200 lb (544 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota JB16?
Yes. The Kubota JB16 lists hydraulic pump flow of 5.8 gpm (22 L/min) and operating weight of 1,301 lb (590 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
