The Kubota GT-26 coolant capacity is listed as 1.59 gal (6 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible.
Kubota GT-26 Coolant Capacity
| Radiator capacity | 1.59 gal (6 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Engine horsepower | 25.6 hp (19.1 kW) |
| Engine displacement | 1.5 L (91.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota GT-26 Coolant and Engine Notes
| Coolant capacity note | The Kubota GT-26 coolant spec points to 1.59 gal (6 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available |
|---|---|
| Radiator capacity note | The Kubota GT-26 radiator figure is 1.59 gal (6 L). Treat it as radiator context, not always the complete refill amount |
| Coolant type note | The captured coolant type for the Kubota GT-26 is ethylene glycol-based coolant and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Engine context note | For the Kubota GT-26, the supporting engine specs are engine horsepower 25.6 hp (19.1 kW) and displacement 1.5 L (91.5 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | For a coolant change on the Kubota GT-26, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota GT-26 Coolant Capacity FAQ
How much coolant does the Kubota GT-26 take?
The main coolant amount captured for the Kubota GT-26 is 1.59 gal (6 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota GT-26?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota GT-26, the captured coolant type is ethylene glycol-based coolant and ASTM D3306 compatible.
What antifreeze mix does the Kubota GT-26 use?
The captured antifreeze mix for the Kubota GT-26 is the coolant mix specified in the manual. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota GT-26 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota GT-26 coolant capacity?
The captured engine context is horsepower 25.6 hp (19.1 kW) and displacement 1.5 L (91.5 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
