The Kubota GM73 has a 3-point hitch lift capacity of 1,800 lb (816 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 5,390 lb (2,445 kg).
Best rear lift figure1,800 lb (816 kg)
Lift at 24 inches1,800 lb (816 kg)
Hitch categoryCategory 1
Operating weight5,390 lb (2,445 kg)
Kubota GM73 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,540 lb (699 kg)
Lift capacity at 24 inches behind link ends
1,800 lb (816 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
5,390 lb (2,445 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
1,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
5,390 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota GM73 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota GM73 rear hitch spec points to 1,800 lb (816 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota GM73, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
For hydraulic context, the Kubota GM73 is listed at 8.2 gpm (31 L/min). Do not confuse pump flow with lift capacity; they answer different questions
Operating weight note
Weight matters with rear implements. The Kubota GM73’s captured operating weight is 5,390 lb (2,445 kg), which affects ballast, traction and stability
Rear implement matching
The practical reason to check rear lift on the Kubota GM73 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota GM73 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota GM73?
Rear lift capacity for the Kubota GM73 is shown as 1,800 lb (816 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota GM73 is listed at 1,800 lb (816 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota GM73?
Yes. The Kubota GM73 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota GM73?
Start with 1,800 lb (816 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Is lift capacity enough to size implements for the Kubota GM73?
No. The Kubota GM73 may list 1,800 lb (816 kg) of rear lift, but the 5,390 lb (2,445 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
