The Kubota GL337 has a 3-point hitch lift capacity of 2,980 lb (1,352 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 3,230 lb (1,465 kg).
Best rear lift figure2,980 lb (1,352 kg)
Lift at 24 inches2,980 lb (1,352 kg)
Hitch categoryCategory 1
Operating weight3,230 lb (1,465 kg)
Kubota GL337 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,800 lb (1,270 kg)
Lift capacity at 24 inches behind link ends
2,980 lb (1,352 kg)
Hitch category
Category 1
Hitch control type
position control
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
3,230 lb (1,465 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
3,230 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota GL337 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota GL337 rear hitch spec points to 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota GL337, start with Category 1, then check lift capacity and tractor stability
Hitch control note
The captured hitch-control data for the Kubota GL337 mentions position control. Treat this as context only and confirm the exact control setup in the operator manual
Hydraulic flow note
Hydraulic pump flow is listed as 8.2 gpm (31 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Operating weight note
For the Kubota GL337, operating weight is 3,230 lb (1,465 kg). Use that beside rear lift capacity before hanging a heavy implement out the back
Rear implement matching
The practical reason to check rear lift on the Kubota GL337 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota GL337 3-Point Hitch FAQ
What is the Kubota GL337 3-point hitch lift capacity?
The Kubota GL337 is listed with 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota GL337 24-inch lift capacity mean?
It means the Kubota GL337 is rated to lift 2,980 lb (1,352 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota GL337 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 2,980 lb (1,352 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota GL337 lift?
Use the 2,980 lb (1,352 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 1 and operating weight 3,230 lb (1,465 kg) before choosing the implement.
Is lift capacity enough to size implements for the Kubota GL337?
No. The Kubota GL337 may list 2,980 lb (1,352 kg) of rear lift, but the 3,230 lb (1,465 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
