The Kubota GL33 has a 3-point hitch lift capacity of 1,500 lb (680 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 9.5 gpm (36 L/min), and operating weight 2,844 lb (1,290 kg).
Best rear lift figure1,500 lb (680 kg)
Lift at 24 inches1,500 lb (680 kg)
Hitch categoryCategory 1
Operating weight2,844 lb (1,290 kg)
Kubota GL33 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
1,500 lb (680 kg)
Hitch category
Category 1
Hydraulic pump flow
9.5 gpm (36 L/min)
Operating weight
2,844 lb (1,290 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
9.5 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,844 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota GL33 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota GL33 rear hitch spec points to 1,500 lb (680 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota GL33, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
The Kubota GL33’s captured hydraulic pump flow is 9.5 gpm (36 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota GL33 operating weight is listed as 2,844 lb (1,290 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
The practical reason to check rear lift on the Kubota GL33 is implement fit. Think box blade, small rotary cutter, tiller, ballast box, and rear blade, then compare actual implement weight
Kubota GL33 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota GL33?
Rear lift capacity for the Kubota GL33 is shown as 1,500 lb (680 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota GL33 is listed at 1,500 lb (680 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota GL33?
Yes. The Kubota GL33 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota GL33?
Start with 1,500 lb (680 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Is lift capacity enough to size implements for the Kubota GL33?
No. The Kubota GL33 may list 1,500 lb (680 kg) of rear lift, but the 2,844 lb (1,290 kg) operating weight and 9.5 gpm (36 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
