The Kubota GL300 has a 3-point hitch lift capacity of 1,800 lb (816 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 3,086 lb (1,400 kg).
Best rear lift figure1,800 lb (816 kg)
Lift at 24 inches1,800 lb (816 kg)
Hitch categoryCategory 1
Operating weight3,086 lb (1,400 kg)
Kubota GL300 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
1,800 lb (816 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
3,086 lb (1,400 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
1,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
3,086 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota GL300 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota GL300 rear hitch spec points to 1,800 lb (816 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota GL300, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
For hydraulic context, the Kubota GL300 is listed at 8.2 gpm (31 L/min). Do not confuse pump flow with lift capacity; they answer different questions
Operating weight note
Weight matters with rear implements. The Kubota GL300’s captured operating weight is 3,086 lb (1,400 kg), which affects ballast, traction and stability
Rear implement matching
The practical reason to check rear lift on the Kubota GL300 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota GL300 3-Point Hitch FAQ
What is the Kubota GL300 3-point hitch lift capacity?
The Kubota GL300 is listed with 1,800 lb (816 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota GL300 24-inch lift capacity mean?
It means the Kubota GL300 is rated to lift 1,800 lb (816 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota GL300 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 1,800 lb (816 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota GL300 lift?
Use the 1,800 lb (816 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 1 and operating weight 3,086 lb (1,400 kg) before choosing the implement.
Is lift capacity enough to size implements for the Kubota GL300?
No. The Kubota GL300 may list 1,800 lb (816 kg) of rear lift, but the 3,086 lb (1,400 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
