The Kubota GL280 has a 3-point hitch lift capacity of 1,200 lb (544 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 2,976 lb (1,350 kg).
Best rear lift figure1,200 lb (544 kg)
Lift at 24 inches1,200 lb (544 kg)
Hitch categoryCategory 1
Operating weight2,976 lb (1,350 kg)
Kubota GL280 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,800 lb (816 kg)
Lift capacity at 24 inches behind link ends
1,200 lb (544 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
2,976 lb (1,350 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,976 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota GL280 Hitch and Rear Lift Notes
24-inch lift note
The Kubota GL280’s 1,200 lb (544 kg) lift rating at 24 inches behind the link ends is the better real-world number for mounted implements than a bare hitch-end rating
Hitch category note
Hitch category on the Kubota GL280 is Category 1. That is one of the first checks before buying a rear blade, tiller, mower or ballast box
Hydraulic flow note
The Kubota GL280’s captured hydraulic pump flow is 8.2 gpm (31 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota GL280 operating weight is listed as 2,976 lb (1,350 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
For the Kubota GL280, compare 1,200 lb (544 kg) with real implement weight. Common rear-implement checks include box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota GL280 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota GL280?
Rear lift capacity for the Kubota GL280 is shown as 1,200 lb (544 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota GL280 is listed at 1,200 lb (544 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota GL280?
Yes. The Kubota GL280 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota GL280?
Start with 1,200 lb (544 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota GL280?
Yes. The Kubota GL280 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 2,976 lb (1,350 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
