The Kubota GL220 has a 3-point hitch lift capacity of 1,500 lb (680 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 and hydraulic pump flow 6.6 gpm (25 L/min).
Best rear lift figure1,500 lb (680 kg)
Lift at 24 inches1,500 lb (680 kg)
Hitch categoryCategory 1
Kubota GL220 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,500 lb (680 kg)
Lift capacity at 24 inches behind link ends
1,500 lb (680 kg)
Hitch category
Category 1
Hitch control type
position control
Hydraulic pump flow
6.6 gpm (25 L/min)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
6.6 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Kubota GL220 Hitch and Rear Lift Notes
Rear lift capacity note
For the Kubota GL220, 1,500 lb (680 kg) is the headline rear-lift capacity captured. This matters for ballast boxes, tillers, blades, mowers and other mounted implements
24-inch lift note
The 24-inch lift figure is usually the more useful number because rear implements hang behind the lift arms, not directly on them
Hitch category note
The Kubota GL220 hitch category is listed as Category 1. This matters because rear implements need to match the tractor’s hitch pin size and geometry
Hitch control note
The Kubota GL220’s hitch-control field is shown as position control. Use it as a soft reference, not a headline specification
Hydraulic flow note
The 6.6 gpm (25 L/min) hydraulic flow figure helps round out the Kubota GL220’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Rear implement matching
Use the Kubota GL220’s hitch capacity as a filter before shopping for box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota GL220 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota GL220?
Rear lift capacity for the Kubota GL220 is shown as 1,500 lb (680 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota GL220 is listed at 1,500 lb (680 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota GL220?
Yes. The Kubota GL220 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota GL220?
Start with 1,500 lb (680 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Does hydraulic pump flow matter for the Kubota GL220?
Yes, but it is not the same as lift capacity. The Kubota GL220 is listed at 6.6 gpm (25 L/min) hydraulic pump flow, while the rear lift number tells you what the hitch can raise.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
