Kubota GL200 Tractor Dimensions, Length, Width & Height

Quick answer:

The Kubota GL200 tractor is 116.1 in long, 49.2 in wide, and 77 in tall, with a 61 in wheelbase.

Length116.1 in (9 ft 8.1 in) / 2,948.9 mm
Width49.2 in (4 ft 1.2 in) / 1,249.7 mm
Height77 in (6 ft 5 in) / 1,955.8 mm
Wheelbase61 in (5 ft 1 in) / 1,549.4 mm
Ground clearance13.2 in (1 ft 1.2 in) / 335.3 mm

Kubota GL200 Dimensions

Overall length 116.1 in (9 ft 8.1 in) / 2,948.9 mm
Overall width 49.2 in (4 ft 1.2 in) / 1,249.7 mm
Overall height 77 in (6 ft 5 in) / 1,955.8 mm
Wheelbase 61 in (5 ft 1 in) / 1,549.4 mm
Ground clearance 13.2 in (1 ft 1.2 in) / 335.3 mm
Rear tread width 39.8 in (3 ft 3.8 in) / 1,010.9 mm

Tractor Size Comparison Chart

Overall length comparison

This model

116.1 in

Average

125 in

Low

100 in

High

155 in

Overall width comparison

This model

49.2 in

Average

60 in

Low

45 in

High

78 in

Overall height comparison

This model

77 in

Average

89 in

Low

70 in

High

108 in

Wheelbase comparison

This model

61 in

Average

72 in

Low

58 in

High

88 in

Ground clearance comparison

This model

13.2 in

Average

12 in

Low

8 in

High

17 in

Kubota GL200 Extra Dimension Notes

Fitment note The Kubota GL200 physical size reads as length at 116.1 in (9 ft 8.1 in) / 2,948.9 mm, width at 49.2 in (4 ft 1.2 in) / 1,249.7 mm, and height at 77 in (6 ft 5 in) / 1,955.8 mm. Use those values as the baseline before adding implement length.
Wheelbase note The Kubota GL200 wheelbase is 61 in (5 ft 1 in) / 1,549.4 mm. That number is worth checking if you care about loader stability or ride feel.
Ground clearance note The Kubota GL200 ground clearance comes through as 13.2 in (1 ft 1.2 in) / 335.3 mm. It matters when the ground is not flat and clean.
Tread width note The captured tread data for the Kubota GL200 gives rear tread only: 39.8 in (3 ft 3.8 in) / 1,010.9 mm.

Storage Tips

  • Floor space is not enough; check the door height, side clearance and attachment length.
  • Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 8 ft high, 8 ft wide, and 15 ft deep.
  • For a compact tractor, storage usually comes down to doorway height and attachment length.
  • Use the 61 in wheelbase as a clue for how much approach room is needed near the shed entrance.

Storage FAQ

What size garage will fit the tractor?

The tractor itself is 116.1 in long, 49.2 in wide, 77 in tall, and 61 in wheelbase. For storage, that means the opening should be closer to 8 ft high and 8 ft wide, with about 15 ft of usable depth.

What size door should I check?

Measure the real clear opening, not the advertised door size. You need it to clear the Kubota GL200’s 77 in height and 49.2 in width, with about 15 ft for the 116.1 in length.

Do attachments change the storage size?

Yes. Measure the tractor in storage trim: highest point compared with 77 in, widest point compared with 49.2 in, and longest parked length compared with 116.1 in.

How much maneuvering room should I allow?

If you cannot approach straight, go wider than 8 ft. With 49.2 in tractor width and a 61 in wheelbase, angled entries need extra side margin.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.