The Kubota GB110 has a 3-point hitch lift capacity of 2,200 lb (998 kg) at 24 inches behind the link ends. It also lists hydraulic pump flow 8.2 gpm (31 L/min) and operating weight 1,058 lb (480 kg).
Best rear lift figure2,200 lb (998 kg)
Lift at 24 inches2,200 lb (998 kg)
Operating weight1,058 lb (480 kg)
Kubota GB110 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,540 lb (699 kg)
Lift capacity at 24 inches behind link ends
2,200 lb (998 kg)
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
1,058 lb (480 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
1,058 lb
Average
1,300 lb
Low
700 lb
High
2,200 lb
Kubota GB110 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota GB110 is 2,200 lb (998 kg) (lift at 24 inches behind the link ends). In plain terms, it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments
24-inch lift note
For the Kubota GB110, the 2,200 lb (998 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The 8.2 gpm (31 L/min) hydraulic flow figure helps round out the Kubota GB110’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 1,058 lb (480 kg) operating weight gives context for the Kubota GB110’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota GB110’s lift capacity against gear like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota GB110 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota GB110?
Rear lift capacity for the Kubota GB110 is shown as 2,200 lb (998 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota GB110 is listed at 2,200 lb (998 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Can I choose implements from lift capacity alone?
No. For the Kubota GB110, lift capacity is only one check. Hitch category, pin size and implement geometry still need confirming.
How should I match rear implements to the Kubota GB110?
Start with 2,200 lb (998 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Is lift capacity enough to size implements for the Kubota GB110?
No. The Kubota GB110 may list 2,200 lb (998 kg) of rear lift, but the 1,058 lb (480 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
