Kubota F2880 Belt Size

Quick answer:

The deck belt size found is 111 in (2,819 mm) long by 0.5 in (13 mm) wide.

Deck belt sizelength 111 in (2,819 mm) and width 0.5 in (13 mm)
Deck size60 in deck

Kubota F2880 Belt Size and Part Numbers

Mower deck belt length 111 in (2,819 mm)
Mower deck belt width 0.5 in (13 mm)
Deck size 60 in deck

Belt Size Comparison Chart

Belt length comparison

This model

111 in

Average

110 in

Low

75 in

High

155 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

Mower deck size comparison

This model

60 in

Average

60 in

Low

48 in

High

72 in

Kubota F2880 Belt Notes

Mower deck belt note The Kubota F2880 deck belt measurement captured here is length 111 in (2,819 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Deck size note The Kubota F2880 deck size captured here is 60 in deck. This helps separate 42-inch, 48-inch, 54-inch and larger deck belt setups
Fitment note Before ordering a Kubota F2880 belt, compare the old belt routing, pulley layout and deck size if available. A close-looking belt can still be wrong

Kubota F2880 Belt Size FAQ

What should you watch when fitting a 111 in (2,819 mm) deck belt on the Kubota F2880?

A 111 in (2,819 mm) deck belt leaves little room for sloppy routing. This is a longer mower belt run, so twist, idler alignment and the belt keeper positions matter. A belt can be the right length and still fail if it is routed wrong. Before blaming the new belt, compare the belt path to the routing decal and make sure it sits on the correct side of each.

Should you buy the Kubota F2880 belt by length only?

No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible

Why does the Kubota F2880 deck size matter before buying a belt?

The deck size captured is 60 in deck. That matters because the same tractor model can use different belt routing on different decks. Match the 60 in deck deck before relying on 111 in (2,819 mm)

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.