The Kubota F2560 deck belt part numbers found are K5763-34710 and K5763-34712. The deck belt size found is 108 in (2,743 mm) long by 1 in (25 mm) wide. The drive belt part number found is 14911-97010.
Kubota F2560 Belt Size and Part Numbers
| Mower deck belt part number | K5763-34710 and K5763-34712 |
|---|---|
| Mower deck belt length | 108 in (2,743 mm) |
| Mower deck belt width | 1 in (25 mm) |
| Drive belt part number | 14911-97010 |
| Deck size | 60 in deck |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Mower deck size comparison
Kubota F2560 Belt Notes
| Mower deck belt note | The Kubota F2560 deck belt listing shows part numbers K5763-34710 and K5763-34712, length 108 in (2,743 mm) and width 1 in (25 mm). Use the listed value as a buying guide, not a blind substitute for the deck-specific parts diagram |
|---|---|
| Drive belt note | The Kubota F2560 drive or transmission belt part number captured here is 14911-97010. This is separate from the mower deck belt |
| Deck size note | The captured mower deck size for the Kubota F2560 is 60 in deck. Deck size matters because the same model family can use different belts with different decks |
| Fitment note | The blunt rule with the Kubota F2560: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast |
Kubota F2560 Belt Size FAQ
Why can the correct Kubota F2560 deck belt still slip?
The deck belt length found is 108 in (2,743 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together
Why does 1 in (25 mm) belt width matter on the Kubota F2560?
The captured deck belt width is 1 in (25 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
How do you avoid mixing up the Kubota F2560 deck and drive belts?
Use the belt position first: deck belt part numbers K5763-34710 and K5763-34712 and drive belt part number 14911-97010. A deck belt number does not automatically fit the drive system, even when an aftermarket listing makes the cross-reference look close
Why does the Kubota F2560 deck size matter before buying a belt?
The deck size captured is 60 in deck. That matters because the same tractor model can use different belt routing on different decks. Match the 60 in deck deck before relying on 108 in (2,743 mm)
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
