Kubota BX1880 Tractor Dimensions, Length, Width & Height

Quick answer:

The Kubota BX1880 tractor is 44.1 in wide and 81.9 in tall.

Width44.1 in (3 ft 8.1 in) / 1,120.1 mm
Height81.9 in (6 ft 9.9 in) / 2,080.3 mm
Ground clearance7.6 in / 193 mm

Kubota BX1880 Dimensions

Overall width 44.1 in (3 ft 8.1 in) / 1,120.1 mm
Overall height 81.9 in (6 ft 9.9 in) / 2,080.3 mm
Ground clearance 7.6 in / 193 mm
Rear tread width 32.2 in (2 ft 8.2 in) / 817.9 mm

Tractor Size Comparison Chart

Overall width comparison

This model

44.1 in

Average

165 in

Low

120 in

High

220 in

Overall height comparison

This model

81.9 in

Average

160 in

Low

125 in

High

220 in

Ground clearance comparison

This model

7.6 in

Average

28 in

Low

18 in

High

45 in

Kubota BX1880 Extra Dimension Notes

Fitment note The Kubota BX1880 has captured dimensions of width at 44.1 in (3 ft 8.1 in) / 1,120.1 mm and height at 81.9 in (6 ft 9.9 in) / 2,080.3 mm. Use them before assuming it will fit through tight access.
Ground clearance note The Kubota BX1880 gives a ground clearance figure of 7.6 in / 193 mm. It helps describe where the tractor can work comfortably.
Tread width note The captured tread data for the Kubota BX1880 gives rear tread only: 32.2 in (2 ft 8.2 in) / 817.9 mm.

Storage Tips

  • Floor space is not enough; check the door height, side clearance and attachment length.
  • Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
  • For this class, doorway width and attachment clearance are major planning numbers.

Storage FAQ

What size garage will fit the tractor?

The tractor itself is 44.1 in wide and 81.9 in tall. For storage, that means the opening should be closer to 10 ft high and 8 ft wide, with about the tractor length plus attachment room of usable depth.

What size door should I check?

Use 10 ft high and 8 ft wide as the door-and-bay target. That is based on the tractor’s 81.9 in height, 44.1 in width and length not captured length, plus working clearance.

Do attachments change the storage size?

Yes. Keep the bare dimensions in mind: length not captured long, 44.1 in wide and 81.9 in tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.

How much maneuvering room should I allow?

A straight run into the bay is the cleanest setup. For a length not captured long tractor, about a clear straight approach before the doorway outside the door is a better benchmark than squeezing in from a tight turn.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.