The Kubota B2201 has a 3-point hitch lift capacity of 1,540 lb (699 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 6.6 gpm (25 L/min), and operating weight 1,786 lb (810 kg).
Best rear lift figure1,540 lb (699 kg)
Lift at 24 inches1,540 lb (699 kg)
Hitch categoryCategory 1
Operating weight1,786 lb (810 kg)
Kubota B2201 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
1,540 lb (699 kg)
Hitch category
Category 1
Hydraulic pump flow
6.6 gpm (25 L/min)
Operating weight
1,786 lb (810 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,540 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,540 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
6.6 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
1,786 lb
Average
1,300 lb
Low
700 lb
High
2,200 lb
Kubota B2201 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota B2201 is 1,540 lb (699 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota B2201, the 1,540 lb (699 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The 6.6 gpm (25 L/min) hydraulic flow figure helps round out the Kubota B2201’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 1,786 lb (810 kg) operating weight gives context for the Kubota B2201’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota B2201’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota B2201 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota B2201?
Rear lift capacity for the Kubota B2201 is shown as 1,540 lb (699 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota B2201 is listed at 1,540 lb (699 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota B2201?
Yes. The Kubota B2201 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota B2201?
Start with 1,540 lb (699 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Is lift capacity enough to size implements for the Kubota B2201?
No. The Kubota B2201 may list 1,540 lb (699 kg) of rear lift, but the 1,786 lb (810 kg) operating weight and 6.6 gpm (25 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
