The Kubota B2050 has a 3-point hitch lift capacity of 1,200 lb (544 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 9.8 gpm (37.1 L/min), and operating weight 1,598 lb (725 kg).
Best rear lift figure1,200 lb (544 kg)
Lift at 24 inches1,200 lb (544 kg)
Hitch categoryCategory 1
Operating weight1,598 lb (725 kg)
Kubota B2050 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Lift capacity at 24 inches behind link ends
1,200 lb (544 kg)
Hitch category
Category 1
Hydraulic pump flow
9.8 gpm (37.1 L/min)
Operating weight
1,598 lb (725 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
9.8 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
1,598 lb
Average
1,300 lb
Low
700 lb
High
2,200 lb
Kubota B2050 Hitch and Rear Lift Notes
Rear lift capacity note
For the Kubota B2050, 1,200 lb (544 kg) is the headline rear-lift capacity captured. This matters for ballast boxes, tillers, blades, mowers and other mounted implements
24-inch lift note
The 24-inch lift figure is usually the more useful number because rear implements hang behind the lift arms, not directly on them
Hitch category note
The Kubota B2050 hitch category is listed as Category 1. This matters because rear implements need to match the tractor’s hitch pin size and geometry
Hydraulic flow note
The Kubota B2050’s captured hydraulic pump flow is 9.8 gpm (37.1 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota B2050 operating weight is listed as 1,598 lb (725 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
Use the Kubota B2050’s hitch capacity as a filter before shopping for box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota B2050 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota B2050?
Rear lift capacity for the Kubota B2050 is shown as 1,200 lb (544 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota B2050 is listed at 1,200 lb (544 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota B2050?
Yes. The Kubota B2050 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota B2050?
Start with 1,200 lb (544 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota B2050?
Yes. The Kubota B2050 lists hydraulic pump flow of 9.8 gpm (37.1 L/min) and operating weight of 1,598 lb (725 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
