The John Deere Z994R is 89 in long, 68 in wide, and 73 in tall, with a 50 in wheelbase.
Length89 in (7 ft 5 in) / 2,260.6 mm
Width68 in (5 ft 8 in) / 1,727.2 mm
Height73 in (6 ft 1 in) / 1,854.2 mm
Wheelbase50 in (4 ft 2 in) / 1,270 mm
Ground clearance4.5 in / 114.3 mm
John Deere Z994R Dimensions
Overall length
89 in (7 ft 5 in) / 2,260.6 mm
Overall width
68 in (5 ft 8 in) / 1,727.2 mm
Overall height
73 in (6 ft 1 in) / 1,854.2 mm
Wheelbase
50 in (4 ft 2 in) / 1,270 mm
Ground clearance
4.5 in / 114.3 mm
Front tread width
48 in (4 ft 0 in) / 1,219.2 mm
Rear tread width
48 in (4 ft 0 in) / 1,219.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
89 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
68 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
73 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
50 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
4.5 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere Z994R Extra Dimension Notes
Wheelbase note
The John Deere Z994R wheelbase reads 50 in (4 ft 2 in) / 1,270 mm. Use it as a comparison number across similar tractors.
Ground clearance note
The clearance number for the John Deere Z994R is 4.5 in / 114.3 mm. This helps separate field-ready sizing from simple storage dimensions.
Tread width note
The John Deere Z994R tread-width values are listed as 48 in (4 ft 0 in) / 1,219.2 mm at the front and 48 in (4 ft 0 in) / 1,219.2 mm at the rear. That tells you more than overall width alone.
Storage Tips
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Do not assume residential garage fit unless height and bay depth both clear comfortably.
A 50 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
Will it fit in a garage?
The John Deere Z994R is 89 in long, 68 in wide and 73 in tall, so a garage only makes sense if it beats those numbers with real clearance. A practical check is 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
Start with the hard numbers: 73 in high, 68 in wide and 89 in long. Then step up to a practical storage target of about 7 ft high, 8 ft wide, and 15 ft deep.
Do attachments change the storage size?
Yes. Treat 89 in as the bare length only. If front or rear gear stays fitted, add roughly 3 ft to 6 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 50 in wheelbase and 68 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
