The John Deere Z960A takes 3 gal (11.4 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed 40/60 coolant and water mix guidance.
Coolant capacity3 gal (11.4 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere Z960A Coolant Capacity Specs
Coolant capacity
3 gal (11.4 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine model
Kawasaki FX1000V
Engine horsepower
37 hp
Engine displacement
61 cu in (1 L)
John Deere Z960A Coolant Capacity Guide
Coolant capacity guide
This model
3 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere Z960A Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere Z960A is 3 gal (11.4 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
The John Deere Z960A cooling system should be refilled close to 3 gal (11.4 L), with coolant choice guided by John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
Coolant type matters on the John Deere Z960A. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere Z960A, the antifreeze mix is listed as 40/60 coolant and water mix. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 3 gal (11.4 L) capacity to buy enough coolant for the John Deere Z960A, but finish the job by checking the actual level marks
Engine context
The engine context for the John Deere Z960A is engine model Kawasaki FX1000V, engine horsepower 37 hp, and engine displacement 61 cu in (1 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere Z960A Coolant Capacity FAQ
What is the full coolant refill capacity for the John Deere Z960A?
Use 3 gal (11.4 L) as the coolant-change amount for the John Deere Z960A. The final level should still be checked at the radiator or overflow bottle
What coolant should I put in the John Deere Z960A?
Use coolant compatible with John Deere Cool-Gard II for the John Deere Z960A. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere Z960A?
The John Deere Z960A antifreeze guidance is 40/60 coolant and water mix. Check the coolant label before mixing concentrate and water
Should the John Deere Z960A coolant be checked hot or cold?
The 3 gal (11.4 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
What signs mean the John Deere Z960A coolant should be flushed?
For the John Deere Z960A, use the 3 gal (11.4 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
