The blade set part number found is M136195. The blade measurement captured is thickness 0.25 in (6 mm). The deck uses 3 blades. The captured deck size is 60 in deck.
Blade set part #M136195
Blade sizethickness 0.25 in (6 mm)
Blade count3 blades
Deck size60 in deck
John Deere Z920R Mower Blade Size and Part Numbers
Mower blade set part number
M136195
Blade thickness
0.25 in (6 mm)
Number of blades
3 blades
Deck size
60 in deck
Blade Size Comparison Chart
Blade thickness comparison
This model
0.25 in
Average
0.25 in
Low
0.188 in
High
0.312 in
Mower deck size comparison
This model
60 in
Average
60 in
Low
48 in
High
72 in
John Deere Z920R Blade Notes
Blade note
The John Deere Z920R blade listing captured here shows blade set part number M136195 and thickness 0.25 in (6 mm). Do not buy purely from model name if the mower deck or serial range is different
Deck note
For the John Deere Z920R, the captured deck information is deck size 60 in deck and blade count 3 blades. Deck size matters because the same model family can use different blade kits
Fitment note
Before ordering John Deere Z920R blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong
John Deere Z920R Mower Blade FAQ
How do you avoid buying the wrong John Deere Z920R blade kit?
Start with the captured deck setup: 60 in deck and 3 blades. Then confirm the blade part number against the deck tag, old blade stamp or parts diagram
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
