The John Deere Z840A is 85 in long, 69 in wide, and 47 in tall.
Length85 in (7 ft 1 in) / 2,159 mm
Width69 in (5 ft 9 in) / 1,752.6 mm
Height47 in (3 ft 11 in) / 1,193.8 mm
John Deere Z840A Dimensions
Overall length
85 in (7 ft 1 in) / 2,159 mm
Overall width
69 in (5 ft 9 in) / 1,752.6 mm
Overall height
47 in (3 ft 11 in) / 1,193.8 mm
Tractor Size Comparison Chart
Overall length comparison
This model
85 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
69 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
47 in
Average
79.8 in
Low
36 in
High
156 in
John Deere Z840A Extra Dimension Notes
Fitment note
The John Deere Z840A has captured dimensions of length at 85 in (7 ft 1 in) / 2,159 mm, width at 69 in (5 ft 9 in) / 1,752.6 mm, and height at 47 in (3 ft 11 in) / 1,193.8 mm. Use them before assuming it will fit through tight access.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 7 ft high, 8 ft wide, and 15 ft deep.
For a compact tractor, storage usually comes down to doorway height and attachment length.
Storage FAQ
Will it fit in a garage?
With 47 in height and 69 in width, the doorway is the first limit; with 85 in length, bay depth is the second. Start with 7 ft high, 8 ft wide, and 15 ft deep, not the bare dimensions.
What size door should I check?
If there are posts, tracks or stored gear near the doorway, go bigger than 7 ft by 8 ft. The tractor’s base size is 85 in long and 69 in wide before attachments.
Do attachments change the storage size?
Yes. The John Deere Z840A’s 69 in width and 47 in height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.
How much maneuvering room should I allow?
A straight run into the bay is the cleanest setup. For a 85 in long tractor, about 12 ft outside the door is a better benchmark than squeezing in from a tight turn.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
