The John Deere Z355R tractor hydraulic pump flow is 8.2 GPM, and hydraulic system pressure is 1,500 psi.
Hydraulic pump flow8.2 GPM
Implement flow6.3 GPM
Total hydraulic flow6.3 GPM
Hydraulic pressure1,500 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity2.5 gal
John Deere Z355R Hydraulic Flow Details
Hydraulic pump flow
8.2 GPM
Implement hydraulic flow
6.3 GPM
Total hydraulic flow
6.3 GPM
Hydraulic system pressure
1,500 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
2.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
8.2 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
6.3 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
6.3 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
1,500 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
2.5 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere Z355R Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere Z355R is 6.3 GPM implement flow; that points toward loader work, steering and simple implements, but not high-demand continuous hydraulic attachments.
Hydraulic pressure note
At 1,500 psi, the John Deere Z355R’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (6.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere Z355R’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
The John Deere Z355R’s hydraulic fluid capacity is listed as 2.5 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
