For the John Deere X758, coolant capacity is 1.59 gal (6 L). Coolant choice is listed as John Deere Cool-Gard II, with 40/60 coolant and water mix guidance.
Coolant capacity1.59 gal (6 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere X758 Coolant Capacity Specs
Coolant capacity
1.59 gal (6 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine model
John Deere X758 features a 24 hp
Engine horsepower
24 hp
Engine displacement
60.6 cu in (1 L)
John Deere X758 Coolant Capacity Guide
Coolant capacity guide
This model
1.59 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X758 Coolant Service Notes
Coolant capacity note
The useful service number here is 1.59 gal (6 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note
For a full coolant service on the John Deere X758, plan around 1.59 gal (6 L) and match the listed coolant guidance: John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
The John Deere X758 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere X758 is 40/60 coolant and water mix. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere X758, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
For comparison, the John Deere X758 engine details listed here are engine model John Deere X758 features a 24 hp, engine horsepower 24 hp, and engine displacement 60.6 cu in (1 L). The coolant capacity remains the service number to use for refilling
John Deere X758 Coolant Capacity FAQ
How much coolant should I buy for the John Deere X758?
Plan around 1.59 gal (6 L) when servicing coolant on the John Deere X758. Recheck the system when cool because air pockets can lower the level
Is John Deere Cool-Gard II listed for the John Deere X758?
Coolant type for the John Deere X758 is listed as John Deere Cool-Gard II. If the system has been filled with something else before, confirm compatibility before mixing
What coolant mix is listed for the John Deere X758?
The John Deere X758 uses 40/60 coolant and water mix where that mix is specified. Confirm the mix against your climate and manual
Do I fill the John Deere X758 exactly to capacity or check the level marks?
Yes. Use the 1.59 gal (6 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system
Can I just add coolant to the John Deere X758 if the level is low?
If the John Deere X758 coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
