The John Deere X740 is 78.8 in long, 46.8 in wide, and 50 in tall.
Length78.8 in (6 ft 6.8 in) / 2,001.5 mm
Width46.8 in (3 ft 10.8 in) / 1,188.7 mm
Height50 in (4 ft 2 in) / 1,270 mm
John Deere X740 Dimensions
Overall length
78.8 in (6 ft 6.8 in) / 2,001.5 mm
Overall width
46.8 in (3 ft 10.8 in) / 1,188.7 mm
Overall height
50 in (4 ft 2 in) / 1,270 mm
Tractor Size Comparison Chart
Overall length comparison
This model
78.8 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
46.8 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
50 in
Average
79.8 in
Low
36 in
High
156 in
John Deere X740 Extra Dimension Notes
Size class note
The John Deere X740 is best grouped as a small compact tractor for fitment purposes. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The John Deere X740 can be treated as a tighter-storage tractor. With length 78.8 in (6 ft 6.8 in) / 2,001.5 mm, width 46.8 in (3 ft 10.8 in) / 1,188.7 mm, and height 50 in (4 ft 2 in) / 1,270 mm, check ROPS/cab height and loader length.
Fitment note
The John Deere X740 size data includes length at 78.8 in (6 ft 6.8 in) / 2,001.5 mm, width at 46.8 in (3 ft 10.8 in) / 1,188.7 mm, and height at 50 in (4 ft 2 in) / 1,270 mm. That gives a clearer answer than just calling it a small compact tractor.
Storage Tips
A straight approach into the bay matters more as tractor width and wheelbase increase.
Compact size helps, but a loader or mower can still make the parked footprint much bigger.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 50 in tall or 46.8 in wide, count it as too tight. The safer check for the John Deere X740 is around 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
The clean check is 7 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 50 in height, 46.8 in width and 78.8 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 50 in for overhead clearance, 46.8 in for side clearance and 78.8 in for bay depth.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 78.8 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
