The John Deere X720 tractor hydraulic pump flow is 4.5 GPM, and hydraulic system pressure is 924 psi.
Hydraulic pump flow4.5 GPM
Implement flow4.5 GPM
Total hydraulic flow4.5 GPM
Hydraulic pressure924 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity7 qt (1.8 gal)
John Deere X720 Hydraulic Flow Details
Hydraulic pump flow
4.5 GPM
Implement hydraulic flow
4.5 GPM
Total hydraulic flow
4.5 GPM
Hydraulic system pressure
924 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
7 qt (1.8 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
4.5 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
4.5 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
4.5 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
924 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
1.8 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere X720 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere X720 is 4.5 GPM implement flow; that points toward loader work, steering and simple implements, but not high-demand continuous hydraulic attachments.
Hydraulic pressure note
At 924 psi, the John Deere X720’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (4.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere X720’s hydraulic system type is closed-center pressure-flow compensated, which is more advanced and better suited to variable hydraulic demand.
Hydraulic fluid capacity note
The John Deere X720’s hydraulic fluid capacity is listed as 7 qt (1.8 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
