The John Deere X590 mower blade part number found is M154202. The blade set part numbers found are M127500 and M145476. The deck uses 3 blades.
John Deere X590 Mower Blade Size and Part Numbers
| Mower blade part number | M154202 |
|---|---|
| Mower blade set part number | M127500 and M145476 |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, bagging, and 3-in-1 |
John Deere X590 Blade Notes
| Blade note | The John Deere X590 blade listing captured here shows single blade part number M154202 and blade set part numbers M127500 and M145476. Do not buy purely from model name if the mower deck or serial range is different |
|---|---|
| Deck note | For the John Deere X590, the captured deck information is blade count 3 blades. Deck size matters because the same model family can use different blade kits |
| Blade type note | For the John Deere X590, blade type is listed as high-lift, mulching, bagging, and 3-in-1. Pick the blade style for the job: clean discharge, bagging lift, or mulching |
| Fitment note | The blunt rule with the John Deere X590: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
John Deere X590 Mower Blade FAQ
Should you buy one John Deere X590 blade or a full set?
The single blade number captured is M154202, and the set number captured is M127500 and M145476. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Which blade type should you use on the John Deere X590?
The blade type captured is high-lift, mulching, bagging, and 3-in-1. Use that against the captured fitment value M154202. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured John Deere X590 blade part number enough to buy from?
The captured blade part number is M154202. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
