The John Deere X360 tractor hydraulic pump flow is 3.5 GPM, and hydraulic system pressure is 1,200 psi.
Hydraulic pump flow3.5 GPM
Implement flow3.5 GPM
Total hydraulic flow17.5 GPM
Hydraulic pressure1,200 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity3 qt (0.8 gal)
John Deere X360 Hydraulic Flow Details
Hydraulic pump flow
3.5 GPM
Implement hydraulic flow
3.5 GPM
Total hydraulic flow
17.5 GPM
Hydraulic system pressure
1,200 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
3 qt (0.8 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
3.5 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
3.5 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
17.5 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
1,200 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
0.8 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere X360 Extra Hydraulic Notes
Hydraulic flow note
The John Deere X360’s total flow is higher than implement flow, so use the implement-flow number when matching hydraulic tools and SCV-driven equipment.
Hydraulic pressure note
At 1,200 psi, the John Deere X360’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (3.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere X360 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere X360 is 3 qt (0.8 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
