The John Deere S80 is 58.5 in long, 43 in wide, and 38 in tall.
Length58.5 in (4 ft 10.5 in) / 1,485.9 mm
Width43 in (3 ft 7 in) / 1,092.2 mm
Height38 in (3 ft 2 in) / 965.2 mm
John Deere S80 Dimensions
Overall length
58.5 in (4 ft 10.5 in) / 1,485.9 mm
Overall width
43 in (3 ft 7 in) / 1,092.2 mm
Overall height
38 in (3 ft 2 in) / 965.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
58.5 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
43 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
38 in
Average
79.8 in
Low
36 in
High
156 in
John Deere S80 Extra Dimension Notes
Size class note
The John Deere S80 reads as a small compact tractor once length, width and height are considered. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The John Deere S80 should be one of the easier tractors to fit under cover. With length 58.5 in (4 ft 10.5 in) / 1,485.9 mm, width 43 in (3 ft 7 in) / 1,092.2 mm, and height 38 in (3 ft 2 in) / 965.2 mm, attachments remain the wildcard.
Fitment note
The John Deere S80 dimensions show length at 58.5 in (4 ft 10.5 in) / 1,485.9 mm, width at 43 in (3 ft 7 in) / 1,092.2 mm, and height at 38 in (3 ft 2 in) / 965.2 mm. Leave extra room for implements, loader frames, tires and steering angle.
Storage Tips
For the John Deere S80, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
A straight approach into the bay matters more as tractor width and wheelbase increase.
For small compact storage, height and attachment length are usually the traps.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 38 in tall or 43 in wide, count it as too tight. The safer check for the John Deere S80 is around 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
The clean check is 7 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 38 in height, 43 in width and 58.5 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 38 in for overhead clearance, 43 in for side clearance and 58.5 in for bay depth.
How much maneuvering room should I allow?
Without a captured wheelbase, the practical rule is simple: give the 58.5 in tractor length enough straight approach before the 8 ft doorway.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
