The John Deere S110 tractor has 19 hp engine horsepower and 19 hp PTO horsepower.
Engine horsepower19 hp
PTO horsepower19 hp
Drawbar horsepower15.2 hp
Rated RPM3,600 rpm
Operating weight423 lb
John Deere S110 Horsepower Details
Engine horsepower
19 hp
PTO horsepower
19 hp
Drawbar horsepower
15.2 hp
Rated engine RPM
3,600 rpm
Operating weight
423 lb
Horsepower Comparison Chart
Engine horsepower comparison
This model
19 hp
Average
64.9 hp
Low
6 hp
High
540 hp
PTO horsepower comparison
This model
19 hp
Average
57.8 hp
Low
6 hp
High
620 hp
Drawbar horsepower comparison
This model
15.2 hp
Average
57 hp
Low
5.5 hp
High
470 hp
Operating weight comparison
This model
423 lb
Average
5,791.3 lb
Low
300 lb
High
59,000 lb
John Deere S110 Extra Horsepower Notes
Horsepower note
Engine and PTO output are nearly matched on the John Deere S110, so the listed PTO figure stays close to the engine rating.
PTO note
The John Deere S110’s 19 hp PTO rating should be read with its 3,600 rpm rated engine speed when comparing implement requirements.
Drawbar note
At 15.2 hp drawbar power, the John Deere S110 is about 3.8 hp below its engine rating once power is measured as pull at the ground.
Power-to-weight note
At 423 lb and 19 hp, the John Deere S110 works out to about 22.3 lb per engine horsepower, making it light for its power, so traction and ballast can become the limiting factor before engine power.
Engine note
For engine identification, the John Deere S110 is listed with rated at 3,600 rpm.
Torque / RPM note
Use the John Deere S110’s 3,600 rpm rated RPM when comparing engine specs across similar tractors.
Official information note
Mistakes do happen. Horsepower, PTO horsepower, drawbar horsepower, weight and engine specs can change by year, market, engine option, cab, transmission and test standard. Please check the operator manual and official deere.com website for official information.
