John Deere M655 Coolant Capacity

Quick answer:

The John Deere M655 coolant capacity is 9.51 gal (36 L). The listed coolant is John Deere Cool-Gard II, with 40/60 coolant and water mix guidance.

Coolant capacity9.51 gal (36 L)Cooling system refill amount
Coolant typeJohn Deere Cool-Gard IIMatch coolant chemistry
Antifreeze mix40/60 coolant and water mixFreeze/boil protection

John Deere M655 Coolant Capacity Specs

Coolant capacity 9.51 gal (36 L)
Coolant type John Deere Cool-Gard II
Antifreeze mix 40/60 coolant and water mix
Engine model Kohler CH25S
Engine horsepower 25 hp
Engine displacement 44.2 cu in (0.72 L)

John Deere M655 Coolant Capacity Guide

Coolant capacity guide

This model

9.51 gal

Class low

0.8 gal

Class typical

2.5 gal

Class high

5 gal

Compared with a broad older small tractor guide, not the full tractor dataset.

John Deere M655 Coolant Service Notes

Coolant capacity note The useful service number here is 9.51 gal (36 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note Use 9.51 gal (36 L) as the refill amount for the John Deere M655, but do not mix coolant types blindly. The listed coolant detail is John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note The listed coolant type for the John Deere M655 is John Deere Cool-Gard II. Match the coolant chemistry before topping up or flushing the system
Antifreeze mix note The listed antifreeze mix for the John Deere M655 is 40/60 coolant and water mix. Mix ratio affects freeze protection, boil protection and corrosion control
Refill check When refilling the John Deere M655, do not pour in 9.51 gal (36 L) and walk away. Fill slowly, run the engine, let it cool and recheck the level
Engine context For comparison, the John Deere M655 engine details listed here are engine model Kohler CH25S, engine horsepower 25 hp, and engine displacement 44.2 cu in (0.72 L). The coolant capacity remains the service number to use for refilling

John Deere M655 Coolant Capacity FAQ

What is the John Deere M655 cooling system capacity?

The John Deere M655 coolant capacity is 9.51 gal (36 L). Use this as the cooling-system refill amount and recheck the level after warm-up and cool-down

What coolant is recommended for the John Deere M655?

Use John Deere Cool-Gard II or a coolant that clearly meets the same requirement for the John Deere M655. Do not rely on color alone because coolant color is not a perfect chemistry guide

Does the John Deere M655 need a 50/50 coolant mix?

The John Deere M655 antifreeze guidance is 40/60 coolant and water mix. Check the coolant label before mixing concentrate and water

Can the John Deere M655 coolant level drop after refilling?

The John Deere M655 may need a small top-up after the first heat cycle. Fill slowly, watch for leaks and recheck the level when cool

Should I flush the John Deere M655 cooling system or just top it up?

Use a full coolant service on the John Deere M655 when the system needs fresh coolant, not just more coolant. Plan the refill around the 9.51 gal (36 L) capacity

Official information note

Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.