The John Deere M653 tractor hydraulic pump flow is 15.9 GPM, and hydraulic system pressure is 2,200 psi.
Hydraulic pump flow15.9 GPM
Implement flow15.9 GPM
Total hydraulic flow21.1 GPM
Hydraulic pressure2,200 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity8 qt (2 gal)
John Deere M653 Hydraulic Flow Details
Hydraulic pump flow
15.9 GPM
Implement hydraulic flow
15.9 GPM
Total hydraulic flow
21.1 GPM
Hydraulic system pressure
2,200 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
8 qt (2 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
15.9 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
15.9 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
21.1 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
2,200 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
2 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere M653 Extra Hydraulic Notes
Hydraulic flow note
The John Deere M653 separates implement flow from total hydraulic flow: 15.9 GPM is the more useful number for rear remotes and hydraulic implements, while 21.1 GPM includes the wider system total.
Hydraulic pressure note
The John Deere M653’s hydraulic pressure is listed at 2,200 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (15.9 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere M653: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere M653 is 8 qt (2 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
