The John Deere LX288 coolant capacity is 9.51 gal (36 L). Use this as the cooling-system refill amount and recheck the level after the engine cools.
Coolant capacity9.51 gal (36 L)Cooling system refill amount
John Deere LX288 Coolant Capacity Specs
Coolant capacity
9.51 gal (36 L)
John Deere LX288 Coolant Capacity Guide
Coolant capacity guide
This model
9.51 gal
Class low
0.8 gal
Class typical
2.5 gal
Class high
5 gal
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere LX288 Coolant Service Notes
Coolant capacity note
The John Deere LX288 cooling system is listed at 9.51 gal (36 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
Use 9.51 gal (36 L) as the refill guide for the John Deere LX288. The final level should still be confirmed at the radiator or overflow bottle
Refill check
Use the 9.51 gal (36 L) capacity to buy enough coolant for the John Deere LX288, but finish the job by checking the actual level marks
John Deere LX288 Coolant Capacity FAQ
How much coolant does the John Deere LX288 take?
The John Deere LX288 takes 9.51 gal (36 L) of coolant. Final level can settle after trapped air leaves the cooling system
Do I need to recheck coolant level after servicing the John Deere LX288?
After a coolant change on the John Deere LX288, check for leaks, watch temperature and recheck the level once the engine cools down
When should contaminated coolant be replaced in the John Deere LX288?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere LX288 cooling system rather than only topping it up
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
