The listed coolant capacity for the John Deere LTR166 is 0.53 gal (2 L). Keep a little extra coolant available for final top-up after air leaves the system.
Coolant capacity0.53 gal (2 L)Cooling system refill amount
John Deere LTR166 Coolant Capacity Specs
Coolant capacity
0.53 gal (2 L)
Engine model
John Deere LTR166 tractor features a Briggs
Engine horsepower
16 hp
Engine displacement
29.3 cu in (0.48 L)
John Deere LTR166 Coolant Capacity Guide
Coolant capacity guide
This model
0.53 gal
Class low
0.8 gal
Class typical
2.5 gal
Class high
5 gal
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere LTR166 Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere LTR166 is 0.53 gal (2 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
After refilling the John Deere LTR166, run it to operating temperature and recheck after cool-down. Air pockets can make the level drop
Refill check
For the John Deere LTR166, 0.53 gal (2 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
For comparison, the John Deere LTR166 engine details listed here are engine model John Deere LTR166 tractor features a Briggs, engine horsepower 16 hp, and engine displacement 29.3 cu in (0.48 L). The coolant capacity remains the service number to use for refilling
John Deere LTR166 Coolant Capacity FAQ
How many gallons of coolant does the John Deere LTR166 hold?
For coolant service, the John Deere LTR166 is listed at 0.53 gal (2 L). Buy enough coolant for that amount and confirm the final level at the machine
Why does coolant level drop after changing coolant in the John Deere LTR166?
Do not judge the job only by pouring in 0.53 gal (2 L). The final check is the actual radiator or overflow level after the system has burped air
Is topping up enough for the John Deere LTR166 cooling system?
Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 0.53 gal (2 L) capacity as the refill guide
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
