The John Deere LA150 physical size reads as width at 42 in (3 ft 6 in) / 1,066.8 mm. Use those values as the baseline before adding implement length.
Tread width note
The John Deere LA150 tread-width row shows 42 in (3 ft 6 in) / 1,066.8 mm at the front and 48 in (4 ft 0 in) / 1,219.2 mm at the rear. It belongs in the page because wheel stance affects fit and row work.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
A straight approach into the bay matters more as tractor width and wheelbase increase.
For this class, doorway width and attachment clearance are major planning numbers.
Storage FAQ
Will it fit in a garage?
If the tractor is stored bare, compare your garage to length not captured long, 42 in wide and height not captured tall. If you want normal parking room, use around 8 ft wide instead.
What size door should I check?
If there are posts, tracks or stored gear near the doorway, go bigger than the tractor height plus clearance by 8 ft. The tractor’s base size is length not captured long and 42 in wide before attachments.
Do attachments change the storage size?
Yes. The John Deere LA150’s 42 in width and height not captured height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.
How much maneuvering room should I allow?
A straight run into the bay is the cleanest setup. For a length not captured long tractor, about a clear straight approach before the doorway outside the door is a better benchmark than squeezing in from a tight turn.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
