John Deere L120 Coolant Capacity

Quick answer:

Coolant capacity for the John Deere L120 is 9.5 gal (36 L). This is the main refill figure for a drain, flush or coolant change.

Coolant capacity9.5 gal (36 L)Cooling system refill amount

John Deere L120 Coolant Capacity Specs

Coolant capacity 9.5 gal (36 L)
Engine model John Deere L120 tractor features a Briggs
Engine horsepower 20 hp
Engine displacement 40 cu in (0.66 L)

John Deere L120 Coolant Capacity Guide

Coolant capacity guide

This model

9.51 gal

Class low

0.8 gal

Class typical

2.5 gal

Class high

5 gal

Compared with a broad older small tractor guide, not the full tractor dataset.

John Deere L120 Coolant Service Notes

Coolant capacity note The John Deere L120 coolant capacity is 9.5 gal (36 L). Treat it as a cooling-system amount, not a radiator-only top-up amount
Coolant service note After refilling the John Deere L120, run it to operating temperature and recheck after cool-down. Air pockets can make the level drop
Refill check For the John Deere L120, 9.5 gal (36 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context The John Deere L120 engine specs listed with this page are engine model John Deere L120 tractor features a Briggs, engine horsepower 20 hp, and engine displacement 40 cu in (0.66 L). They help identify the machine, but they are not a substitute for the coolant capacity

John Deere L120 Coolant Capacity FAQ

What coolant amount is listed for the John Deere L120?

For coolant service, the John Deere L120 is listed at 9.5 gal (36 L). Buy enough coolant for that amount and confirm the final level at the machine

What is the final check after a John Deere L120 coolant change?

Do not judge the job only by pouring in 9.5 gal (36 L). The final check is the actual radiator or overflow level after the system has burped air

Should I drain and refill the John Deere L120 coolant system?

Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 9.5 gal (36 L) capacity as the refill guide

Official information note

Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.