The John Deere L100 coolant capacity is 0.62 gal (2.4 L). Use this as the cooling-system refill amount and recheck the level after the engine cools.
Coolant capacity0.62 gal (2.4 L)Cooling system refill amount
John Deere L100 Coolant Capacity Specs
Coolant capacity
0.62 gal (2.4 L)
Engine model
John Deere L100 tractor features a Briggs
Engine horsepower
17 hp
Engine displacement
30.6 cu in (0.5 L)
John Deere L100 Coolant Capacity Guide
Coolant capacity guide
This model
0.63 gal
Class low
0.8 gal
Class typical
2.5 gal
Class high
5 gal
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere L100 Coolant Service Notes
Coolant capacity note
The John Deere L100 cooling system is listed at 0.62 gal (2.4 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
For a full coolant service on the John Deere L100, plan around 0.62 gal (2.4 L), refill slowly, run the engine, let it cool and recheck the level
Refill check
When refilling the John Deere L100, do not pour in 0.62 gal (2.4 L) and walk away. Fill slowly, run the engine, let it cool and recheck the level
Engine context
The engine context for the John Deere L100 is engine model John Deere L100 tractor features a Briggs, engine horsepower 17 hp, and engine displacement 30.6 cu in (0.5 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere L100 Coolant Capacity FAQ
What is the refill amount for the John Deere L100 cooling system?
The John Deere L100 coolant capacity is 0.62 gal (2.4 L). Use this as the cooling-system refill amount and recheck the level after warm-up and cool-down
Should I run the John Deere L100 after adding coolant?
The John Deere L100 may need a small top-up after the first heat cycle. Fill slowly, watch for leaks and recheck the level when cool
When is a full coolant flush better than a top-up on the John Deere L100?
Use a full coolant service on the John Deere L100 when the system needs fresh coolant, not just more coolant. Plan the refill around the 0.62 gal (2.4 L) capacity
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
