The John Deere GX75 is 30 in wide, with a 42 in wheelbase.
Width30 in (2 ft 6 in) / 762 mm
Wheelbase42 in (3 ft 6 in) / 1,066.8 mm
John Deere GX75 Dimensions
Overall width
30 in (2 ft 6 in) / 762 mm
Wheelbase
42 in (3 ft 6 in) / 1,066.8 mm
Rear tread width
30 in (2 ft 6 in) / 762 mm
Tractor Size Comparison Chart
Overall width comparison
This model
30 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
42 in
Average
79.2 in
Low
34.8 in
High
190.5 in
John Deere GX75 Extra Dimension Notes
Storage fit note
The John Deere GX75 should be one of the easier tractors to fit under cover. With width 30 in (2 ft 6 in) / 762 mm, attachments remain the wildcard.
Wheelbase note
The John Deere GX75 wheelbase comes in at 42 in (3 ft 6 in) / 1,066.8 mm. That affects balance more than simple length alone.
Tread width note
The John Deere GX75 has a captured rear tread width of 30 in (2 ft 6 in) / 762 mm. Use it as a rear-stance reference only.
Storage Tips
For the John Deere GX75, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
A straight approach into the bay matters more as tractor width and wheelbase increase.
The John Deere GX75 should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 42 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
Storage FAQ
Will it fit in a garage?
At 30 in wide and 42 in wheelbase, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft wide before counting attachments.
What size door should I check?
For this storage class, the safer number is 8 ft wide. That keeps the doorway and bay ahead of the tractor’s actual height not captured height, 30 in width and length not captured length.
Do attachments change the storage size?
Yes. The published length not captured length is useful for the bare tractor, but the real storage number is the longest point from front attachment to rear attachment.
How much maneuvering room should I allow?
Use the 42 in wheelbase as the handling clue. If the approach is angled, a 8 ft door may still feel tight, so leave about 8 ft to straighten up.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
