The John Deere GX355 is 31.5 in wide, with a 48 in wheelbase.
Width31.5 in (2 ft 7.5 in) / 800.1 mm
Wheelbase48 in (4 ft 0 in) / 1,219.2 mm
Ground clearance5 in / 127 mm
John Deere GX355 Dimensions
Overall width
31.5 in (2 ft 7.5 in) / 800.1 mm
Wheelbase
48 in (4 ft 0 in) / 1,219.2 mm
Ground clearance
5 in / 127 mm
Front tread width
31.5 in (2 ft 7.5 in) / 800.1 mm
Rear tread width
30.8 in (2 ft 6.8 in) / 782.3 mm
Tractor Size Comparison Chart
Overall width comparison
This model
31.5 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
48 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere GX355 Extra Dimension Notes
Storage fit note
The John Deere GX355 is a realistic candidate for garage-style storage in the right setup. With width 31.5 in (2 ft 7.5 in) / 800.1 mm, measure the door, not just the room.
Fitment note
The John Deere GX355 dimensions point to width at 31.5 in (2 ft 7.5 in) / 800.1 mm. That is the right way to judge whether it fits your setup.
Wheelbase note
With a 48 in (4 ft 0 in) / 1,219.2 mm wheelbase, the John Deere GX355 should be compared as a very large farm tractor, not just by horsepower.
Ground clearance note
The John Deere GX355 ground clearance is listed at 5 in / 127 mm. It is a practical spec for uneven ground and crop clearance.
Tread width note
The John Deere GX355 tread numbers show 31.5 in (2 ft 7.5 in) / 800.1 mm at the front and 30.8 in (2 ft 6.8 in) / 782.3 mm at the rear. They matter most when wheel position is part of the job.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Measure the lowest overhead point, not the tallest part of the shed roof.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 48 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
Because the John Deere GX355 is height not captured tall and 31.5 in wide, door track height and side posts matter. Because it is length not captured long, the bay also needs about the tractor length plus attachment room of usable depth.
What size door should I check?
The clean check is the tractor height plus clearance high, 8 ft wide and the tractor length plus attachment room deep. That gives margin over the listed height not captured height, 31.5 in width and length not captured length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: height not captured for overhead clearance, 31.5 in for side clearance and length not captured for bay depth.
How much maneuvering room should I allow?
Use the 48 in wheelbase plus the length not captured length together. The tractor may clear the doorway but still need space to swing the front or rear around.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
