The John Deere F930 mower blade part number found is M141786. The blade set part numbers found are M150000 and M150001. The blade measurement captured is center hole 1 in (25 mm). The deck uses 3 blades.
John Deere F930 Mower Blade Size and Part Numbers
| Mower blade part number | M141786 |
|---|---|
| Mower blade set part number | M150000 and M150001 |
| Blade center hole size | 1 in (25 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, standard, and 3-in-1 |
John Deere F930 Blade Notes
| Blade note | The John Deere F930 blade listing captured here shows single blade part number M141786, blade set part numbers M150000 and M150001, and center hole 1 in (25 mm). Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money |
|---|---|
| Deck note | For the John Deere F930, the captured deck information is blade count 3 blades. Match the blades to the fitted deck, not just the tractor model name |
| Blade type note | The John Deere F930 blade style captured here is high-lift, mulching, standard, and 3-in-1. Blade type affects airflow and clipping handling, not just cut width |
| Fitment note | The blunt rule with the John Deere F930: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
John Deere F930 Mower Blade FAQ
Can you modify a John Deere F930 blade center hole to fit?
Do not do that. The captured center-hole detail is 1 in (25 mm). Grinding or drilling a mower blade can ruin balance and create vibration
Should you buy one John Deere F930 blade or a full set?
The single blade number captured is M141786, and the set number captured is M150000 and M150001. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Can you swap John Deere F930 blade types?
The blade type captured is high-lift, mulching, standard, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use M141786 as the fitment starting point
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
