The Cub Cadet 60 mower blade part number found is 942-0741A. The blade set part number found is 742-05620. The blade measurement captured is width 3 in (76 mm) and center hole star / 1 in (25 mm). The deck uses 3 blades. The captured deck size is 54 in deck.
Cub Cadet 60 Mower Blade Size and Part Numbers
| Mower blade part number | 942-0741A |
|---|---|
| Mower blade set part number | 742-05620 |
| Blade width | 3 in (76 mm) |
| Blade center hole size | star / 1 in (25 mm) |
| Number of blades | 3 blades |
| Deck size | 54 in deck |
| Blade type | high-lift, mulching, standard, and 3-in-1 |
Blade Size Comparison Chart
Blade width comparison
Mower deck size comparison
Cub Cadet 60 Blade Notes
| Blade note | The Cub Cadet 60 blade listing captured here shows single blade part number 942-0741A, blade set part number 742-05620, and width 3 in (76 mm) and center hole star / 1 in (25 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the Cub Cadet 60, the captured deck information is deck size 54 in deck and blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the Cub Cadet 60 is high-lift, mulching, standard, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | Blades are cheap until you buy the wrong set twice. On the Cub Cadet 60, confirm part number, deck size and blade count before buying |
Cub Cadet 60 Mower Blade FAQ
Should you buy Cub Cadet 60 blades by length only?
No. The blade width found is 3 in (76 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. Use length, width, center hole and OEM part number together where possible
Can you modify a Cub Cadet 60 blade center hole to fit?
Do not do that. The captured center-hole detail is star / 1 in (25 mm). Grinding or drilling a mower blade can ruin balance and create vibration
What is the difference between the Cub Cadet 60 blade number and blade set number?
The captured single blade number is 942-0741A, while the captured blade set number is 742-05620. Use the single blade number for one replacement and the set number when replacing the full deck set
Why does the Cub Cadet 60 deck size matter before buying blades?
The captured deck setup is 54 in deck with 3 blades. That matters because blade sets are deck-specific, not just tractor-model-specific
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official cubcadet.com before ordering replacement blades.
